Medical Equipment Rental

Hospital Bed

Types of hospital beds

a) Manual hospital beds

Manual Hospital Beds are a cost effective solution ideal for patients who either have a caretaker or who have the ability to use the hand crank to raise and lower the bed.

Types of manual hospital beds

• Manual semi fowler bed
• Manual full fowler bed

Manual semi fowler beds

which has a single screw mechanism that is used to adjust the bed for backrest.

Description

• Dimensions : 1950mm (L) x 900mm (W) x 550mm (H)
• CRCA tubular frame (60mm x 30mm)
• Two section Perforated CRCA sheet top.
• Backrest Operated by lever mechanism with attached folding handle.
• Tubular head and foot bows of unequal height with vertical tube supports.
• Four locations for I.V.Rod
• Pretreated & powder coated.
• Customized sizes can be provided as per requirement

Manual Full Fowler beds

have options for different adjustments, making the patient comfortable. The backrest and knee rest position can be maneuvered with separate screws at foot end.

Description

• Dimensions : 1950mm (L) x 900mm (W) x 560mm (H)
• CRCA tubular frame (60mm x 30mm)
• Four section Perforated CRCA sheet top.
• Backrest & kneerest Operated by by lever mechanism with attached folding handle
• Four locations for I.V.Rod.
• Pretreated & powder coated.

Enqure Now

Air Bed

Bed sores or pressure ulcers are localized areas of soft tissue injury resulting from compression between a bony prominence and an external surface. They are quite common in critically ill patients who are forced to stay in bed following critical surgery.

Air bed or air mattress is used to prevent bed sores.

Types of air bed mattress

(a) Bubble Type Air Bed Mattress

Description

• Size L (6ft x W 3ft x H 3in)
• Bubble type 3 Inch Thick Mattress
• Comes with Air Electric Compressor
• Load Bearing:120kg

(b)Spiral Type Air Bed Mattress

Description

• Size L (6ft x W 3ft x H 6in)
• Tube Type 3 Inch Thick Mattress
• Load Bearing: 120Kg
• Comes with Air Electric Compressor

(c)Nayome Air Bed Mattress

The Series-Air mattresses is a 5” semi-digital pump mattress replacement system powered by Nayome Swdn’s technologically advanced multi-functional controller. The mattress comes with a 9.0L linear compressor equipped with a detachable power cord. The semi digital pump integrated with the air mattress has an alternate mode and 20 minutes static mode with selectable cycle time.

The Features of Nayome Swdn’s Series-Air Mattress

• Effective moisture and skin heat reduction through innovative iLAL (independent Low Air Loss)
• Analog dial for adjustable comfort control
• High- quality dual molded-tooth zipper covers for easy laundry and replacement
• Spill resistance via fire-retardant covers
• Medical grade effective vapor permeable to provide user safety

Enqure Now

Wheel Chair

A wheelchair is a manually operated or power-driven device designed primarily for use by an individual with a mobility disability for the main purpose of indoor, or of both indoor and outdoor, locomotion. Wheelchairs come in a wide variety of formats to meet the specific needs of their users

Types of Wheel Chair

a): Basic Wheel Chair

These are lightweight aluminum wheelchairs for patients who need the basic functionality of a wheelchair. These wheelchairs are full-size when open and are easily folded when not in use or travelling. Since the body of the wheelchair is made entirely of Aluminum these are lighter than steel wheelchairs.

1) Description

• Frame Type : Aluminum
• Armrest / Footrest (Detachable \ Flip up) : No/Yes
• Reclining : No
• Wheel Type – Front/Back : Solid Castor/Solid PU Mag Wheel

2)Description

Frame Style: Foldable

• Frame Material: M.S.
• Out to out width in open position (inches): 26″
• Seat Width (inches): 18″
• Total width in closing position (inches): 9″
• Rear Wheel Size: 24″
• Front Wheel Size: 8″
• Seat to floor height (inches): 19″
• Seat Depth (inches): 16″
• Back height (inches): 18″
• Total height (inches): 35″
• Net Weight (kgs): 18.5 K.G.
• Upholstery: BLACK REXINE
• Armrest: Fixed
• Leg rest: Fixed
• Wheel Quality: Mag Wheel WITH SOLID TYER
• Rear Wheel Lock: Available

b): Exclusive wheel chair

For patients who need a LIGHTWEIGHT Aluminum wheelchair with a lot more functionality. The wheelchairs in these series have the premium features like flip-up armrests, detachable footrests.

1) Description

• Frame Type : Aluminum
• Armrest / Footrest (Detachable \ Flip up) : Yes/Yes
• Reclining : No
• Wheel Type – Front/Back : Solid Castor/Pneumatic Mag wheel
• Suitable for: users living in limited space/quick transit
• Super lightweight with efficient self-propel function

2) Description

• Foldable Backrest reduce the storage space
• The new ergonomic hand-rims enhance comfort,flexibility and mobility, making it effortless to propelthe wheelchair.
• Max. User weight: – 100kg
• Overall length, width, height (cm): – 89*56*86

c): Reclining Wheelchair

Reclining wheelchairs are specially designed to allow a person to comfortably recline at incremental angles safely and comfortably. Typically used for accommodation of severe hip extension contractures, orthostatic hypotension, and pressure redistribution for prevention of skin breakdown.

1) Description

• Frame Type : Aluminum
• Armrest / Footrest (Detachable \ Flip up) : Yes/Yes
• Reclining : No
• Wheel Type – Front/Back : Solid Castor/Solid Wheel

2) Description

• Backrest can recline smoothly from 90 to 163 degree
• Detachable armrest offers greater convenience when the user needs to transfer from wheelchair to bed, car seat, or sofa, making it easier for caretakers
• Footrest angle can be adjusted for better leg support when reclining.
• Detachable and height-adjustable headrest.
• Dual brake systems make it much easier for caregivers to push the wheelchair (and apply brake).

3) Description

• Frame Type: – Powder Coating Steel
• Armrest / Footrest (Detachable \ Flip up): – Yes/Yes
• Reclining: -Yes
• Wheel Type Front/Back: -Solid Castor/Pneumatic Wheel

d): Motorized wheelChair

Enqure Now

Walker

A walker or walking frame is a tool for disabled or elderly people who need additional support to maintain balance or stability while walking.

Types of walker

• Walker with wheel
• Walker without wheel

1): Walker with wheel:

This walker is foldable, lightweight with wheels. Very easy to use.

Description: –

• Light weighted walker

2): Walker without wheel :

This is the most common type of walker, and it is available in heavy duty and junior styles. These are best used on indoor surfaces. Because there are no wheels, basic walkers provide the most stability for those who need a little extra help.

Description: –

• Light weighted walker

Enqure Now

Infusion Pump

An infusion pump is a medical device that delivers fluids, such as nutrients and medications, into a patient’s body in controlled amounts. Infusion pumps are in widespread use in clinical settings such as hospitals, nursing homes, and in the home

Description

It is a modular infusion system that is smaller, lighter, and easier to handle than any other existing configuration. Leading the way into the future, this system meets all demands of an outstanding safety concept.

It can also be integrated into the data communications network of every advanced hospital operation.

Performance data

• Automatic rate calculation by calculating volume over time
• Dose rate mode:
• Automatic calculation of delivery rate based on the entry of drug concentration in conjunction with the desired dose rate (e.g.: mg/kg/min)
• Drug Library:
• Up to1500 drug names including therapy data and information can be stored in30 categories
• Up to 50 care unit’s and15 patient profiles possible
• Drug specific soft and hard limits as well as default values can be specified

Operator interface

• Standardized and intuitive user interface for all B. Braun Space infusion pumps
• Due to menu operation and arrow keys the user has to look at the display when doing adjustments

Safety concept

• Integrated piston brake prevents free-flow during syringe change
• Automatic drive technology ensures startup and convenience when changing syringes
• Automatic bolus reduction triggered by occlusion alarm
• Data lock on3 safety levels (parameters and disposables lockable)
• LED alarm indicator with clear alarm message in display

Enqure Now

Lymph Pump

Lymphedema Pumps are compression pumps which force air in sleeves with multiple chambers which house overlapping cells. The pump forces air into the cells which encourage lymph fluid to continue moving and not pool. Lymphedema Pumps are not just a reactive treatment but in many cases they aid in softening fibrotic tissues which will create an environment for higher efficiency lymphatic drainage.

Enqure Now

Feeding Pump

Amika® is an ambulatory volumetric pump delivering feed and fluid in a continuous mode using a linear peristaltic pump technology.

Amika® is designed for safer and intuitive use in nutritional care. Amika® is an easy to use, safe and quiet enteral nutrition pump. Amika and its dedicated sets offer an enteral feeding system that is designed for both hospital and homecare use.

Description: –

Designed for more safety

Dedicated enteral giving sets designed with ENPlus and ENLock patented anti free-flow clamp system giving optical detection system.

Latest sensor technology for enhanced detection capability.

Keypad and Settings Lock functions for a safer use of Amika

Intuitive for higher efficiency

Graphical symbol-based display offering clear and simple symbols for all users

Ergonomic and robust design suitable for hospital and homecare

Direct access to key functions for ease of use

Alarm light indicator to quickly monitor the pump

• Convenient for better comfort
• Virtually silent operating
• Compact design and long battery life for ambulatory use
• Multiple pump settings and accessories to adapt to all environments
• Versatile pump holder usable with a wide range of supports
• Automatic priming function
• Versatile pump holder usable with a wide range of supports

Enqure Now

Syringe Pump

A syringe driver or syringe pump is a small infusion pump (some include infuse and withdraw capability), used to gradually administer small amounts of fluid (with or without medication) to a patient or for use in chemical and biomedical research.

Designed for high performance, unsurpassed accuracy and the highest safety in syringe-based drug delivery

For administration of fluids in nutritional therapy and infusion technique as well as for home care applications

It is designed to deliver drug at a predetermined rate and speed.

Description: –

Performance data

• Wide selection of syringes (from 2 – 50 ml) for higher flexibility

Infusion rates

from 0.01 to 200.0 ml/h

• Automatic calculation of the infusion rate based on volume over time
• Stackable with a built-in locking mechanism
• Battery operable for more than 3 days

Properties

• Automatic recognition of syringe size/fixation
• Automatic bolus reduction after pressure alarm
• Occlusion alarm pressure limits selectable: 0.3/0.6/1.2 bar
• Data Lock Function – keys are blocked

Enqure Now

Suction Machine

A Suction Machine is a device for removing liquids or gases by suction, especially an instrument that uses suction to remove substances, such as mucus or serum, from a body cavity. A suction machine has been prescribed by your doctor to help remove secretions and mucus from your airways.

These suctioning devices, designed for reliable, portable operations. Our suction machines are equipped with high performance features, easy to read gauges, adjustable flow regulators and heavy duty compressors. These machines are also light weight, easy to store and transport.

a): As-Home Aleva Series Suction Machine

Description: –

• Lightweight Compressor & Portable with wheels.
• Portable with wheels
• Double bottle with pedal switch.
• Suitable for home care
• Volume capacity – 5 liters

b): As –Portable aleva Series Suction Machine

Description: –

• AC/DC Model (can be operated by electricity or rechargeable battery)
• Silent Heavy Compressor
• Premium Quality
• Single Bottle Suction Unit
• Table Top model apt for use in Ambulance and in places with frequent power cuts.
• Rechargeable Battery & Car Charger included.

Enqure Now

ETCO2 Machine

ETCO2 (End Tidal CO2) is the partial pressure or maximal concentration of carbon dioxide(CO2) at the end of an exhaled breath, which is expressed as a percentage of CO2 ormmHg. The normal values are 5% to 6% CO2, which is equivalent to 35-45 mmHg. CO2 reflects cardiac output (CO) and pulmonary blood flow as the gas is transported by the venous system to the right side of the heart and then pumped to the lungs by the right ventricles.

• End tidal CO2 (EtCO2) machine is designed to measure the exchange of carbon dioxide using a 50 ml per minute side stream method to provide highly accurate readings.

Enqure Now

DVT Pump

Series-DVT Compression Pump

Nayome Swdn’s Series-DVT compression pump system is a sequential pneumatic compression system which helps in the prevention and treatment of DVT (Deep Vein Thrombosis), a dangerous condition that can lead to pulmonary embolism. Nayome Swdn’s DVT Compression Pump comprises of the specialized air pump and a skin-friendly compression garment to be worn by the user on the calf, foot or thigh. Using the pump’s advanced software, the controller is capable of supplying a pre-set repetitive cycle of 12 seconds inflation accompanied by a 48 seconds deflation. The pressure allows the users to reduce stasis and the risk of early clot formation in the arteries. Nayome Swdn’s innovative DVT compression pumps host a range of features for both the users and the caregivers:

High-quality equipment and material:

The compression pump is designed to be compact and lightweight with the use of high-quality electronic equipment. The anti-bacterial wearable sleeve comes with a special coating to provide an ultra-comfort DVT system.

Comprehensive certifications:

Nayome Swdn’s series of DVT compression pumps have acquired all the major certifications.

Accurate pressure treatments:

A pressure of 30-70mm Hg is used for the calf, calf-thigh and 80-120mm Hg for foot treatments.

Easy controls:

The Series-DVT compression system provides easy to use controls backed by a digital screen showing present pressure cycles and featured alarms.

Integrated battery:

Providing a battery back-up of up to 6 hours, the integrated battery is capable of providing continuous compression therapy with utmost user comfort.

Dual compression:

Nayome Swdn’s Series-DVT compression pump is capable of providing both uniform and sequential active compression to prevent Venous Stasis and Deep Vein Thrombosis.

Enqure Now

Pulse Oximeter

Pulse oximetry is a test used to measure the oxygen level (oxygen saturation) of the blood. It is an easy, painless measure of how well oxygen is being sent to parts of your body furthest from your heart, such as the arms and legs.Brand of oximeter available with us: –

ChoiceMMed Classical Fingertip Pulse Oximeter with 6 Display Modes (C2F): –

• The Fingertip Pulse Oximeter Model MD300C2F is designed for spot-checking blood oxygen saturation levels and pulse rate. Using it, athletes, pilots and people who would like to know their SpO2 and pulse rate can get accurate readings quickly. That data is the important indicator for whether your body is in the health state. Description: –
• How to use it? Operation of this oximeter is easy. You just need to plug one of your fingers into the comfortable clamp and press the button on the front panel (Details please read the attached user’s manual). Measurement completes soon, SpO2, pulse rate, pulse bar will show on the dual color OLED screen.
• It can display readings in 4 directions, more convenient, you don’t have to bend your finger to read the values, which also ensures the accuracy of measurement. Each time you press the power button, the oximeter switches to another display mode, 4 directions and 2 format SpO2 waveform. The brightness of the display is 10 levels, you could adjust it freely.
• Its small size makes it easy to carry around in its durable carrying case. This is not a medical device, perfect for sports and aviation.
• What’s in the box?
• One Fingertip Pulse Oximeter MD300C2F with lanyard, user’s manual, durable carrying pouch, and two AAA 1.5V alkaline batteries could be continuously operated 40+ hours.

Enqure Now

Ventilator

A ventilator is a type of equipment that is used to assist people in breathing when they are unable to do so themselves. The ventilator is attached to a tube placed in the patient’s airway so it can deliver breathes into the lungs of the patient.

Types of homecare ventilator: –

• Invasive
• Non invasive

Invasive/ noninvasive ventilation is delivered through an endotracheal tube inserted into the patient’s nose or mouth, or through a tracheostomy, a surgical incision in the neck to access the trachea.

• Brands of ventilator available with us: –

• Philips trilogy100 –

Description:

Simple Ventilation, Sophisticated Technology. Trilogy makes invasive and noninvasive home ventilation less complicated with a simplified user interface and Respironic’s proven BiPAP technology for greater versatility. Its lightweight design and internal and detachable batteries make portability easier for patients on the go. Simplicity Light, versatile, and easy to use, Trilogy100 offers clinicians and patients one of life’s greatest qualities – simplicity. Whether at home or in alternative care sites, the Trilogy100 portable volume and pressure support ventilator with BiPAP technology is made for adult and pediatric use. Offers Two Circuit Options Interchangeable active and passive exhalation porting blocks give clinicians the flexibility to choose the best available circuit and interface for patients. Its internal PEEP, combined with a single limb circuit, creates an uncomplicated application. Portability Trilogy100 has been designed with portability in mind. • Weighs 5 kg (11 lb.) • Includes 3-hour internal and 3-hour detachable batteries • Ability to connect to an external lead acid battery Direct View Ventilation Management Software Trilogy100 provides ventilation data and prescription management through the use of an SD memory card.

• Environmental Specifications : – Temperature: 5°C – 40°C
• Relative humidity: 15% – 95% Atmospheric pressure: 110 kPa to 60 kPa
• Physical Specifications Weight: 11 lbs, 5 kgs
• Size: 6.6″L x 11.2″W x 9.3″H (16.68 cm L x 28.45 cm W x 23.52 cm H)
• Controls:-
• Circuit types: Active with PAP, passive Ventilation types: Volume control, pressure control, bi-level
• Volume modes: AC, SIMV (w/PS), CV Pressure modes: CPAP, S, S/T, T, PC-SIMV (w/PS)
• IPAP: 4 – 50 cm H20
• EPAP: 0 – 25 cm H20 for active circuits; 4 – 25 cm H20 for passive circuits
• CPAP: 4 – 20 cm H20 for passive circuits
• PEEP: 0 – 25 cm H20 for active circuits; 4 – 25 cm H20 for passive circuits
• Pressure support differential: 0 – 30 cm H20
• Measured Patient Parameters
• Tidal volume: 50 – 2000 ml
• Breath rate: 0 – 60 for AC mode, 1 – 60 for all other modes
• Inspiratory time: 0.3 – 5.0 secs
• Rise time: 1 – 6
• Ramp start pressure: 0 – 25 cm H20 for active circuits; 4 – 25 cm H20 for passive circuits; 4 – 19 cm H20 in CPAP mode
• Ramp length: Off, 5 – 45 minutes
• Flex: Off, 1 – 3
• Flow trigger sensitivity: 1 – 9 l/min
• Flow cycle: 10% – 90%
• Apnea rate: 4 – 60 BPM
• Tidal volume: 0 – 2000 ml
• Minute ventilation: 0 – 99 l/min
• Leak rate: 0 – 200 l/min
• Respiratory rate: 0 – 80 BPM
• Peak inspiratory flow: 0 – 200 l/min
• Peak inspiratory pressure: 0 – 99 cm H20
• Mean airway pressure: 0 – 99 cm H20
• Percentage patient triggered breaths: 0 – 100%
• I:E ratio: 9.9:1 to 1:9.9
• Circuit disconnect: Off, 10 – 60 secs
• Apnea: Off, 10 – 60 secs
• High tidal volume: Off, 50 – 2000 ml
• Low tidal volume: Off, 50 – 2000 ml
• High minute ventilation: Off, .1 – 99 l/min
• Low minute ventilation: Off, .1 – 99 l/min
• High respiratory rate: Off, 4 – 80 BPM
• Low respiratory rate: Off, 4 – 80 BPM

ResMed Astral 150 ventilator

Astral is an award-winning, portable, life support ventilator designed with your quality of life in mind. Astral won the prestigious Red Dot Design Award in 2014 and also went on to winAustralia’s Good Design Award.*

With Astral you can feel confident you’re receiving ventilation that suits your respiratory needs, giving you the freedom to live life more fully. Astral has a small, sleek, sturdy design, and can give you the same high standard of ventilation at home that you would receive in a hospital.

Description: –

• Lightweight. Weighing just 3.2 kg, Astral makes it easy to be mobile
• Mains or battery powered. An internal battery gives you up to 8 hours of ventilation. You can add 1 or 2 optional external batteries for up to 24 hours of uninterrupted freedom.
• Optional mobility bags. A choice of 2 mobility bags can protect Astral when you’re on the move. The bags’ transparent panels mean you can access the touchscreen easily. Broad, wide straps enable you to carry it comfortably over your shoulder or mount it on a wheelchair.
• Easy to use. Astral’s menu is straightforward and intuitive. It has a large color LCD display. The display gives your clinicians and carers essential information about your condition.
• Pre-settable and saved programs. Because your breathing needs may change throughout the day, Astral can save multiple programs and settings. At the press of a button, you can switch to the pre-set program most suitable for you at the time.
• Alarms. Features fixed and adjustable alarms, including an advanced disconnection alarm for added reassurance.
• The optional Remote Alarm II can keep you connected to your carers when you’re alone.Easy start and stop. A Big-button feature on the main display allows you to start or stop the ventilator, or mute the alarm, simply by touching the screen.

Enqure Now

Walking Aid

A mobility aid/ walking aid is a device designed to assist walking or otherwise improve the mobility of people with mobility impairment

a): MS20MARATHON SUPPORT SERIESWALKING AIDS

Description: –

• Aluminum Walking Sticks

b) MS110MARATHON SUPPORT SERIESWALKING AIDS

Description: –

• Quadripod Walking Sticks
• Steel body

c):MS120MARATHON SUPPORT SERIESWALKING AIDS

Description: –

• Quadripod Walking Sticks
• Aluminum body

Enqure Now

Commode Chair

Commode chairs a portable toilet that can be placed at the bedside of a patient whose activity is limited; these are often used in the home when the patient is too debilitated to reach the bathroom. The receptacle for waste can be removed and emptied.

Types of commode chairs: –

Basic commode chair

• Basic Commode Basic Commode Chair provides the basic functionality of portability and convenience. These are light weighted and foldable, thus making them perfect for travelling.

V20 VITA SERIES BASIC COMMODE CHAIR

Description: –

• Frame Type : Powder Coating Steel
• Foldable : Yes
• Height Adjustable: No
• Pot Attached : Yes

Premium commode chair

Premium commode chair would be perfect for patients who need features like height adjustability, armrest and the option of using their commode chairs as bath benches.

VP20 STEEVILA PLUS SERIES PREMIUM COMMODE CHAIR

Description: –

• Frame Type : Chromed Steel
• Foldable : Yes
• Height Adjustable: Yes
• Pot Attached : Yes

Description: –

• Frame Type: Aluminum
• Foldable : Yes
• Height Adjustable: Yes
• Pot Attached : Yes

VP20 ALUMINIUM VITA PLUS SERIES PREMIUM COMMODE CHAIRS

Description: –

• Frame Type : Chromed Steel
• Wheel Type – Front/Back : Solid Castor/Chormed Steel
• Foldable : No
• Height Adjustable : No
• Pot Attached : No

Enqure Now

Oxygen Gas Equipments

Oxygen therapy is needed because respiratory system can no longer get enough oxygen just by breathing in air, so oxygen gas equipment’s are used which delivers purer oxygen to lungs.

Types of oxygen gas equipment’s:

Oxygen concentrator

Oxygen Concentrators are medical devices that deliver almost pure oxygen through the nose via tubes. Air generally contains 21% oxygen; the rest is mostly nitrogen. Concentrators remove the nitrogen, leaving the remaining air 87-95% oxygen. Then the oxygen concentrators deliver the oxygen to the patient by means of tubes or masks. Oxygen concentrator output is generally measured in LPM (liters per minute). These are home concentrators.

Size available in oxygen concentrator

• 5liter/LPM (Liter per minute)
• 10liter/LPM (Liter per minute)

Brand available with us of oxygen concentrator up to 5 liter

• Phillips (everflo)
• Airsep (elite)
• DeVilbiss
• Evox

Brand available with us of oxygen concentrator up to 10 liter

• Airsep (intensity)
• Olex

Oxygen concentrator up to 5 liter

Phillips (EverFlo)

Home oxygen system

Until now, oxygen concentrators have been very similar – heavy, bulky, noisy, or requiring frequent maintenance. EverFlo from Respironics is a unique stationary concentrator that delivers what homecare providers want and patients deserve.

Description

• Light weighted for easy transport.
• System uses less electricity and produces less heat.
• Oxygen purity indicator option for increased security
• Durable metal cannula is less likely to break.
• Compact design looks less like a medical machine
• Humidifier bottle platform for extra flexibility.
• No home care provider filter change for two years. Patients do not ever have to change filters.
• Recessed flow meter reduces accidental breakage.

Specifications

• General system
• Dimensions 58.4 cm H x 38.1 cm W x 24.1 cm D (23″ H x 15″ W x 9.5″ D)
• Input Voltage 120 +/- 10% VAC
• Sound level 45 (typical) dB
• OPI (Oxygen Percentage Indicator) Alarm Levels Low Oxygen (82%) and Very Low Oxygen (70%)
• Average Power Consumption 350 W
• Input Frequency 60 Hz
• Oxygen concentration* (at 5 LPM) 93 +/- 3 %
• Liter Flow 0.5-5 l/min
• Outlet Pressure 5.5 PSI
• Weight 14 (31) kg (lbs.)
• Operating Temperature 12°C to 32°C/55°F to 90°F
• Storage/Transport Humidity -34°C to 71°C (-30°F to 160°F) up to 95% relative humidity
• Operating Humidity up to 95 %
• Operating Altitude 0 to 2286 m (0 to 7500 ft)

Airsep (elite):

Elite is AirSep Corporation’s most economical line of stationary oxygen concentrators, delivering up to 5 lpm of therapeutic oxygen in home, hospital, and clinical settings. With hundreds of thousands of units in daily use throughout the world, this low power consumption concentrator is known for high performance, easy maintenance, and unmatched reliability.

Description

• Manufacturer Airsep
• Actual Weight 54
• Shipping Weight 60.0000
• Able to use at night? Yes
• Battery Duration No
• Dimensions 27.5 in. high x 16.5 in. wide x 14.5 in. deep
• Electrical Requirement 115 VAC, 60Hz, 4.0 amps, 350 watts
• Max. Altitude No
• Warm Up Time 5 Minutes
• FAA Airline Approved No
• Charge in Car Capabilities No
• Maximum Flow Setting 1-5LPM 6PSI
• Concentration 87-93% Any setting
• Decibel No
• Sound Level 45 Decibel

DeVilbiss

5 Liter Oxygen Concentrator

Built upon a legacy of reliable, field-proven concentrator models, the DeVilbiss 5 Liter Oxygen Concentrator was updated with enhanced quality, durability, performance and simplicity in mind. Made in the USA, this robust oxygen concentrator offers just the right balance of cool and quiet. The simplified, two-piece cabinet design allows for 15% typical sound quality improvement and an improved cooling process. Paired with proven, exclusive DeVilbiss Turn-Down Technology, these improvements minimize wear on internal components and increase the life expectancy of the unit. In fact, recent production statistics show a less than 3% warranty return rate. The concentrator is easy to assemble and disassemble.

Description

• Made in the USA of US and Imported Parts
• Exclusive DeVilbiss OSD® (Oxygen Sensing Device) standard on every unit — increases accuracy and reliability for longer service intervals
• Noticeably quiet operation – 15% typical sound quality improvement
• Readily accessible patient controls and protected cannula fitting
• Recessed humidifier nook prevents damage
• Easy to assemble/disassemble two-piece cabinet for ease of maintenance
• Lockable flow meter — Pediatric flow meter available
• Convenient top and side handles for easy transport
• Accommodates up to a 50-foot cannula (15.3 meters)

Evox

Oxygen concentrator up to 10 liter

Airsep (intensity): –

New Life Intensity combines high pressure with high flow to create the most power-efficient 10 liter per minute (LPM) oxygen concentrator, operating at only 410 watts for reduced power consumption. With an outlet pressure approximately three times higher than most other concentrators, this unit is designed to power respiratory accessories including large volume jet nebulizers, venti-masks, medication nebulizers, and long oxygen tubing runs.

Description

• Manufacturer Airsep
• Actual Weight 56
• Shipping Weight 64.0000
• Able to use at night? Yes
• Battery Duration No
• Dimensions 27.5 in. high x 16.5 in. wide x 14.5 in. deep
• Electrical Requirement 120 VAC, 60 Hz, 4.0 amps;
• Max. Altitude No
• Warm Up Time 5 Minutes
• FAA Airline Approved No
• Charge in Car Capabilities No
• Maximum Flow Setting 1-10LPM 22PSI
• Concentration 87-93% Any setting
• Decibel No
• Sound Level 54 Decibel
• Olex

Enqure Now

Patient Monitor

Medical monitoring devices are some of the most important pieces of equipment in a healthcare facility. Without reliable monitoring equipment you could easily miss a piece of information that could mean the difference between life and death.

Types of patient monitor

Multipara Monitor

Introduction

This device can monitor such parameters as ECG, RESP, SpO2, PR, NIBP and dual-channel TEMP, etc. It integrates parameter measurement module, display and recorder in one device to form compact and portable equipment. At the same time, its built-in replaceable battery provides convenience for patient moving.

Description

• 15” TFT color LCD, 15-language interface (Simplified Chinese, Traditional Chinese, English, French, German, Turkish, Spanish, Portuguese, Italian, Dutch, Romanian, Russian, Kazakhstan, Polish, Czech).
• Fan less design, quiet, energy-saving and clean, which reduces the possibility of cross-infection
• All-round monitor for adult, pediatric and neonate
• With standard interface, OxyCRG, trend chard, big character interface and view bed, convenient to observe.
• Waveform, parameter color and location can be set optionally.
• Operation mode: keys and buttons.
• Display up to 8-channel waveform on one screen
• Display 7-lead ECG waveform on one screen, and with ECG step function
• Adopt digital SpO2 technology, anti-motion and anti-ambient light interference, and measurement can be performed under the circumstance of weak filling.
• HRV analysis function
• NIBP measurement mode: Manual/AUTO/Continuous, storage for 4800-group NIBP data.
• Review for 71 alarm events of all parameters and 60 arrhythmia alarm events.
• Drug concentration calculation and titration table functions.
• Print trend table data with one-key
• Connect to Central Monitoring System by 3G, Wi-Fi or wired mode
• AC/DC, built-in rechargeable lithium battery achieves uninterrupted monitoring.
• Anti-high frequency surgical unit, defibrillation-proof (special leads are necessary).

ThreePara Monitor

Introduction: –

CMS5100 Patient Monitor adopts Oscillometry for NIBP measuring, Photoelectric Oxyhemoglobin Inspection Technology combining Capacity Pulse Scanning & Recording Technology for SpO2 measuring.

Systolic Pressure (SYS), Diastolic Pressure (DIA), Mean Pressure (MAP), SpO2 and Pulse rate (PR) can be accurately measured.

Compact appearance, comprehensive functions, simple and convenient operation, which is applicable for hospitals, community medical treatment and family

Description

• Applicable for adult, pediatric and neonatal for all-round monitoring, easy operation and high cost performance.
• Applicable for medicine, surgery, operating room, ICU/CCU, emergency room, obstetrics and gynecology, pediatrics.
• Built-in rechargeable Li-polymer battery for uninterrupted monitoring.
• Compact and flexible appearance, easy for carrying and be suitable for indoor and outdoor (in ambulance) monitoring.
• With user-friendly interface.
• Display with 2.8” (320×240) color TFT LCD and red and yellow highlight LED.
• Visual and audible alarm for Systolic Pressure (SYS), Diastolic Pressure (DIA), Mean Pressure (MAP), SpO2 and Pulse rate (PR), and upper and lower limit of alarm can be set.
• Unique Flash memory, storage for up to 2000 NIBP data and 78000 SpO2 data.
• Convenient and quick in inquiring measurement data, review for NIBP trend graph within 24-hour and SpO2 and Pulse rate (PR) trend graph within 20-hour.

Enqure Now

Miscellaneous Product

a) Saline stand

NOAH SS 20NOAH SERIES saline stand

Description

• Size: H 133-223cm

b) Over Bed Table

NOAH OBT 10NOAH SERIES

Description

• Height can be adjusted.

C)Stretcher

A framework of two poles with a long piece of canvas slung between them, used for carrying sick, injured, or dead people.

Types of stretcher

• Aluminum Alloy Foldaway Stretcher
• Foldable cloth Stretcher

Aluminum Alloy Foldaway Stretcher

Description

• Comes with a strong Safety Bag
• Unfolded Size (LxWxH): 215 x 55 x 15cm
• Folded Size (LxWxH): 108 x 17 x 9cm
• Self-weight: 6kg
• Load Bearing: 159kg

Foldable cloth Stretcher

Description

• Load Bearing: 120 kg

Enqure Now

Bi PAP Machine

BiPAP is a machine which provides continuous positive airway pressure system with a time-cycled or flow-cycled change. Bi pap is equipment used to relieve patients suffering from chronic obstructive pulmonary disease and acute respiratory failure.

BiPAP (also referred to as BPAP) stands for Bi-level Positive Airway Pressure, and is very similar in function and design to a CPAP machine (continuous positive airway pressure). Similar to a CPAP machine, A BiPAP machine is a non-invasive form of therapy for patients suffering from sleep apnea.

CPAP delivers a single preset air pressure to keep the airways open. Bi-PAP delivers two levels of pressure: one that corresponds with the inhale (IPAP) and one which corresponds with the exhale (EPAP).

A Bi PAP machine also includes a “smart” breath timing feature that adapts to the user’s respiratory patterns; it resets at different pressures to help keep the breathing rate on target. This offers relief to the user’s typically overworked muscles of breathing.

Types of Bi PAP machine available with us

PHILLIPS

Types of Phillips bi pap machine: –

• Bi-PAP
• Bi-PAP ST
• Auto Bi –PAP
• Bi-PAP AVAPS
• Bi-PAP A40
• Bi-PAP Pro is a fixed pressure machine that delivers positive airway pressure at a single fixed level.

Description

• Pressure Range: 4 to 25CM h20
• Flex Pressure Relief: Bi-Flex
• Ramp Time: 0 to 45 min (5-min increments)
• Dimensions: 7″ L x 10.75″ W x 4″
• Weight: 4.8 pounds
• CPAP Filters: Foam and Ultra-Fine
• Device set-up: LCD/control wheel/push button
• Data storage capacity (minimum): Display: Compliance VIC 7- and 30-day averages
• SD Card: >1 year
• On-board: up to 6 months
• Compliance meter: Breathing detection
• Altitude compensation: Automatic
• Electrical requirements: 100 – 240 VAC, 50/60 Hz
• Humidification: Integrates with System One heated humidifier and pass-over humidifier
• Miscellaneous: Lighted LEDs

Bi-PAP S/T Machine

offers more monitoring choices than any leading noninvasive brand, with the added security of SPONTANEOUS TIMED mode. Keeping patient management efficient and effective

Description

• Size: 18 cm x 14 cm x 10 cm (7″ L x 5.5″ W x 4″ H)
• Weight: Approximately 1.36 kg (3 lbs.)
• Modes: S, ST
• Bi-Flex: Available on S mode
• Timed inspiration: 0.5 to 3.0 seconds
• IPAP: 4 to 25 cm H2O
• EPAP: 4 to 25 cm H2O
• CPAP: 4 to 20 cm H2O
• Ramp: 0 to 45 minutes
• Breath rate: 0 to 30 BPM
• Patient alarms available: Patient Disconnect, Apnea, Low Minute Ventilation
• Sound level: < 30 dBA typical at 10 cm H20 pressure
• Electrical: AC voltage source 100 to 240 VAC, 50/60 Hz, 2.1 A
• DC power 12 VDC, 5.0 A
• Displayed parameters: Patient pressure, leak, tidal volume, minute ventilation, and respiratory rate
• Filters: Foam and optional ultra–fine

Auto Bi-PAP Machine

is a Bi-level machine with auto-adjusting pressure

Product Description

• Pressure Range: 4 to 25 cm H2O
• Flex pressure relief: 0 to 3 cm H2O
• Ramp time: 0 to 45 min (5-min increments) min
• Starting ramp pressure: 4 to min EPAP pressure (patient adjustable) and 4 to min EPAP pressure (auto mode)
• Diameter: 18 cm L x 14 cm W x 10 cm H (7″ L x 5.5″ W x 4″ H)
• Weight without humidifier: 3 lbs; 1.36 kg (without humidifier)
• Filters: Foam and optional ultra-fine
• Device set-up: LCD/control wheel/push button
• Data storage capacity (minimum): Display: compliance VIC, 1-, 7- and 30-day averages SD card > 1 year On-board: up to 6 months
• Compliance meter: Breathing detection
• Altitude compensation: Automatic
• Electrical requirements: 100-240 VAC, 50/60 Hz
• Humidification: Integrates with System One 60 Series heated humidifier and System One 60 Series Heated Tube humidifier

Philips Dreamstation Auto Bi-PAP

Bi-PAP AVAPS

Non-Invasive ventilator provides the comfort of pressure ventilation and the consistent efficacy of assured tidal volume.

Tidal volume is the lung volume representing the normal volume of air displaced between normal inhalation and exhalation when extra effort is not applied. In a healthy, young human adult

Description

• Starting ramp: 4 to EPAP min
• Dimensions: 18 cm L x 14 cm W x 10 cm H (7″ L x 5.5″ W x 4″ H)
• Pressure range: EPAP 4 – 25 cm H2O; IPAP 4 – 25 cm H2O; CPAP 4 – 20 cm H2O
• Flex pressure relief: 0 to 30 (S-mode)
• Breath rate: 0 – 30 beats per minute
• Ramp time: 0 to 45 min (5-min increments) min
• Weight without humidifier: 1.36 (3) kg (lbs)
• On-board data storage capacity (minimum): up to 3 mon
• Filters: Foam and optional ultra-fine
• Electrical requirements: 100-240 (50/60) VAC (Hz)
• Device setup: LCD/control wheel/push button
• Data storage capacity Display (minimum): Compliance VIC, 1-, 7- and 30-day averages
• Data storage capacity SD Card (minimum): > 1 yr
• Compliance meter: Breathing detection
• Altitude compensation: Automatic
• Humidification: Integrates with System One 60 Series humidifier and System One 60 Series Heated Tube humidifier.
• Miscellaneous: Lighted LEDs

Philips Dreamstation Bi-PAP Avaps

Bi-PAP A40 Machine

Inspired by you and your patients, the bi-level ventilator BiPAP A40 has been designed to combine ease-of-use and comfort with technological innovations that adapt to your patient’s condition to deliver enhanced therapy. The AVAPS-AE fully automatic ventilation mode supports long term therapy compliance.

• Ventilation modes: CPAP, S, S/T, PC, T, AVAPS-AE
• Hybrid ventilation: AVAPS (Average Volume Assured Pressure Support) AVAPS-AE
• IPAP: 4 – 40 cm H2O
• EPAP: 4 – 25 cm H2O
• Target tidal volume: (when AVAPS enabled) 200 – 1500 ml
• Breath rate: 0 – 40 bpm (4 – 40 bpm in T mode)
• Inspiratory time: 0.5 – 3 sec.
• Triggering and cycling: Auto-Track; Sensitive Auto-Track; Flow triggering
• Rise time: 1 (100 ms) – 6 (600 ms)
• Size: 21.6 cm W x 19 cm L x 11.5 cm H
• Weight: 2.1 Kg (with power supply)
• Noise level: < 30 dBA at 10 cm H2O
• Humidification: System One humidity control and ‘Dry Box’ technology
• Alarms: Patient disconnection
  Apnea
  Low minute ventilation
  Low tidal volume (with AVAPS/AVAPS-AE only)
  High respiratory rate
• Monitoring: Pressure, tidal volume, minute ventilation, respiratory rate, leak, I/E ratio
• Battery Back- up: Detachable battery module: 5 hours at IPAP 12 cm H2O / EPAP 7 cm H2O and 12 bpm
• DC power source: 12 VDC, 5.0 A (external battery); 24 VDC, 4.2 A (power supply)
• Data management : EncorePro 2 and Direct View software; Compatible with oximetry module; Advanced detection of residual respiratory events (Apnea/Hypopnea Index, Obstructed Airway Apnea, Clear Airway Apnea, Hypopnea, Periodic Breathing, RERA, Large Leak and Snore)
• Remote control: Compatible with PC Direct
• Polygraph and polysomnograph connections: Direct connection to Alice PDx and Alice6 PSGs; AOM to connect to most PSG systems

Enqure Now

C-PAP Machine

Continuous positive airway pressure therapy (C-PAP) uses a machine to help a person who has obstructive sleep apnea (OSA) breathe more easily during sleep. A CPAP machine increases air pressure in your throat so that your airway doesn’t collapse when you breathe in.

Brands of C-PAP machine available with us:

A)Phillips

Philips Dreamstation auto C-PAP

Phillips Remstar Auto C-pap

System One Sleep Phillips Remstar Auto C-pap Therapy System uses advanced intelligence to deliver excellent care while making patient management easy.

Description

• Pressure Range 4 to 20 cm H2O (.5 increments)
• Ramp Time 0 to 45 min. (5-min. increments)
• Starting Ramp Pressure 4 to CPAP; user adjustable
• Dimensions 7″ L x 5.5″ W x 4″ H, 18 cm L x 14 cm W x 10 cm H
• Weight 3 lbs. / 1.36kg
• Altitude Compensation Automatic – Maximum height 7500 feet.
• Filters Pollen and optional ultra-fine
• Device Set-Up LCD/Control Wheel or Encore Software
• Data Storage Capacity
• Display: Compliance, AHI, Leak, Pressure 7-Day and 30-Day averages
  SD Card >1 year (daily details with flow waveforms)
  On-board: up to 6 months
  Compliance Meter Breathing detection
• Electrical Requirements 100 – 240 VAC, 50/60 Hz, 12volt DC
• European Voltage Usage: Yes, outlet adapters required
• Max Exposure Heat for Machine Machine should not be exposed to heat greater than 140 degrees Fahrenheit.

B)DeVilbiss: –

DeVilbiss IntelliPAP Auto Adjust CPAP Machine

The DeVilbiss IntelliPAP Standard CPAP System is designed to optimize therapy effectiveness. There are three large buttons for CPAP users to operate the device. When travel is a concern take advantage of the compact design allowing the CPAP, humidifier, hose and accessories to store away in its travel bag. Packed with features, the CPAP is programmed with:

• Automatic Altitude Adjustment
• Pressure Ramp
• Smart Code compliance tracking
• Auto ON/OFF
• Reminder Alerts
• Backlit LCD
• Easy-to-Follow CPAP user Menu
• CPAP hose connects to back of unit

Built for durability, the unit is water resistant, has a stainless steel heat transfer plate and a water chamber constructed of Lexan (polycarbonate resin thermoplastic). Use the optional heated humidifier to provide additional comfort and humidity for your sleep therapy. The exclusive humidifier chamber is easy to remove and designed to maximize humidity with a larger surface area. Along with the unique baffle design, the water chamber allows the airflow to collect more humidity. DeVilbiss designed the chamber to hold enough water for a full night’s sleep. At the humidifier’s highest setting, you can still expect a full 8 hours of humidification.

Powering the unit is achieved through docking with the CPAP, eliminating the need for bulky power adapters or extra hoses.

C pap without humidifier chamber C pap with humidifier chamber

Description

This Product Includes

• IntelliPAP CPAP Machine
• Carrying Case
• 6 Foot Hose
• 8 Foot Power Cord
• Reusable Foam Filter
• Disposable Fine Filter
• Patient Manual

Product Specifications

• Pressure Range: 3-20 cm H20 (.5 increments)
• Ramp Time: 0-45 mins (5 min increments and .5 increments for pressure)
• Starting Ramp Pressure: From 4cm up to CPAP pressure, CPAP-user-adjustable
• Dimensions – Machine Alone (Without Humidifier): 4.2″ H x 6.5″ W x 6.9″ D
• Dimensions – Machine with Humidifier Attached: 6.4″ H x 6.5″ W x 8.4″ D
• Dimensions – Travel Bag with Extension Closed: 9″ H x 9.5″ W x 6.75″ D
• Dimensions – Travel Bag with Extension Open: 9″ H x 12″ W x 6.75″ D
• Weight: 2.8 lbs CPAP, 4.45 lbs with humidifier and CPAP
• On-Board Memory: Therapy Data – 90 Days; Usage Data – 3 Years
• SD Card File Format Requirement: FAT16 (SDHC FAT32 is Not Compatible)
• Altitude Compensation: Automatic – maximum height 9000 feet.
• Electrical Requirements: 100 – 240 AC, 12volt DC
• European Voltage Usage: Yes, outlet adapters required
• Required Settings: 1 Pressure Setting is required

Enqure Now

High Flow Respiratory Humidifier

Menu prequalification affiliations

Enqure Now